The F-HDMI transmitter and receiver pair are used to carry HDMI video signals over longer distances than have traditionally been available. Thor singlemode HDMI over fiber systems only need a single strand of singlemode fiber optic cable with SFP LC connectors. Modern SM-FOC gives these units a range of up to 25km. HDMI video cables are expensive and have a very limited range, typically less than 50 ft. Longer runs of HDMI cables also experience significant distortion of the signal. The F-HDMI system allows a user to transport full uncompressed HDMI video at 1080i/1080p with up to 8 incorporated audio signals over a simple and inexpensive fiber optic cable. A simple passive DVI to HDMI adapter can also be used to transport DVI signals over the fiber. For extending set top boxes we also have a IR return path option. This uses an IR receiver at the receiving end to transmit commands from an IR remote over a return optical path. The IR signals are then rebroadcast via an included LED to control equipment on the transmitting end. Contact Thor today for help designing fiber optic distribution systems.
• Simple to read input and output signal indicators
• Supports HDTV resolutions up to 1080p
• Supports computer display resolution up to 1920/1200@60Hz
• Transmission distances of up to 25km possible with single mode fiber using LC Fiber Connectors
• Easy setup with Plug and Play interfaces
• IR remote control over seperate optical Return Path
| *All Specifiactions Subject to Change Without Notice | |||
| Video Parameters | |||
|
720p/1080i/1080p 800*600 to 1920*1200 | ||
|
Supports HDMI Interface with HDCP Function | ||
| Audio Parameters | |||
|
Un-balanced (stereo) | ||
|
10k/50 Ohms (stereo) | ||
|
5 dBu/4Vpp (stereo) | ||
|
20Hz ~?20kHz @ -3dB | ||
|
>70dB @ 1k Hz (stereo) | ||
|
3.5 mm | ||
| Physical Parameters | |||
|
H×W×D 170*100*35 mm | ||
|
12VDC @ 1.5A | ||
|
0 +50 C | ||
|
0 to 95% non-condensing | ||
| Optical Parameters | |||
|
Complies with IEEE802.3zin in 1000BASE_LX | ||
|
1310 nm | ||
|
-9.5 to 3dBm rate of emission for balance optical signal @1310nm | ||
|
-23dBm balance optical rate @1310nm | ||
|
180 μW | ||
|
<15 μW | ||
|
-116 DB/Hz | ||
|
<10 dB | ||
|
240M Hz to 1.65G Hz | ||
|
1m~500m for multimode optical cable 1m~20km for single mode | ||
|
H×W×D 170*100*35 mm | ||
| Performance Parameters | |||
|
Single mode | ||
|
Simplex - 1 fiber | ||
|
SFP included with LC | ||
If you're looking for this kind of solution over fiber; we can do
that, but it would require 4 or 5 strands of fiber.
Essentially each HDMI input with embedded Audio would go on its own fiber.
If your Audio is Analog external than, we have 4 or 8 Audio over fiber as well
So you are looking at using 4 or 5 strands of fiber in this case.
F-HDMI-SMSC
https://thorbroadcast.com/product/hdmi-fiber-extender-with-ir.html
F-8A-TxRx
https://thorbroadcast.com/product/analog-audio-over-fiber-1.html/63
If you could use SDI instead of the HDMI, we do have a solution over one fiber:
https://thorbroadcast.com/product/4-sdi-hdsdi-over-1-fiber-mini-extender.html
Please Let me know if that is something you'd be interested in.
1 Bi-Directional HD-SDI and 10/100 Ethernet + RS485 + Audio over single Fiber TX/RX
The F-M1SDI-TR-ET is a high performance, reliable, 1-channel bidirectional HD-SDI video optical transceiver + 10/100 Ethernet transceiver over the single fiber which performs in real-time, loss-free, and high-quality SDI video and Ethernet transmission over an optical single-mode fiber.
4 HD-SDI + 10/100 Ethernet +RS485 + Audio over single fiber TX/RX with Aux
The F-M4SDI-ET-TxRx is a 4-channel SD/HD-SDI video and 1x 10/100 Bi-directional data transceiver over single fiber which performs in real-time, for high-quality video transmission over a single optical fiber. Provides one 10/100Mb/s Fast Ethernet (data transmission) which can be widely used in TV live broadcast, high-definition video conferencing, high-definition video monitoring In addition it also transports RS485 and has availability for an Aux Card (purchased separately).
ES
