SDI to DVB-S/S2 Satellite Modulator

H-1SDI-DVBS2
Qty: 1
Price: $ 6,995.00
Availability: In stock Condition: new
Shipping: starting at $22.00 Warranty: 2Yrs
Quantity:
add to basket
ask about product
send request
Description Features Drawings Model Selection Specification Q&A Documents Support
L-band DVBS/S2 model description
H-1SDI-DVBS2 - HD/SD/3G SDI input ( 950Mhz - 2100Mhz) L-band RF output MPEG2 or H.264 Encoding / AC3 Audio / Closed Captioning
Description

HD/SD-SDI 720p/1080i/1080p Encoder + Satellite DVB-S/S2 Modulator  

It is integrated  HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also  have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

 

DVB-S2 MODULATOR

It is integrated  HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

Thor DVB-S/S2 Encoder & Modulator is an integrated HD Video Encoder with the sattelitte S2 modulator. Hot- swapable modules with diferent video inputs  (CVBS/SDI/HDMI/YPbPr…) are available.

It has also 1 channel ASI input for external  TS (MPEG2 or H.264) multiplexing  . It outputs ASI and DVB-S/S2 RF (IF Optional) simultaneously.

The signal source could be SDI camera, HDMI Blue-ray players and etc. It has web-based NMS GUI interface for easy online management.

Featuring its high performance and low cost, the S2 is especially used by TV stations or DSNG systems to encode SD/HD programs and output to uplink.

 

CONFIGURATION PAGE FOR sATELITTE MODULATOR

Features
  • Convert HD-SDI or  HDMI or  Component YPbPr HD Video to Satellite modulated carrier 
  • Any SDI or  HDMI & YPbPr Inputs up to 720p/1080i/1080p
  • Licensed HDMI inputs
  • Closed Captions supported on 608 Analog Inputs
  • Support DVB-S/S2 RF (IF Optional - Model Specific) ) output and ASI output
  • Output Frequency: 950-2150MHz; or IF: 50-200MHz (Model Specific)
  • Support 10MHz reference clock
  • ASI Input for additional TS multiplexing from any other encoder
  • Fully IP control and Network Management through browser
  • Front Panel LCD local control   
  • IPTV Output Unicast or Multicast IGMP UDP (optional)
  • ASI Output with multiplexer cherry picking
  • Low Latency available   70-120ms
  • AC3 Audio available (AC3 model)
  • MPEG2 Video or MPEG4 H.264 Encoding
  • Support RF 24V power output
  • Other Video Inputs cards available – Hot swappable - SDI Card, YpbPr Card, HDMI Card
  • 5 Year Warranty - Free Tech Support - Cables and Power Supply included
Drawings
Model Selection

TWO MODELS AVAILABLE: L-band or IF (Intermediate Frequency)

1)  H-1SDI-DVBS   with ( 950Mhz - 2100Mhz)   L-band  RF output

2)  H-1SDI-DVBS-IF with  IF (50-200mhz) RF output  

 

Base Main  Model H-1SDI-DVBS2  has 1 HD/SD-SDI input and L-Band RF DVB-S/S2 Output

 The configuration page for S2 modulator with L-band 950-2100 Mhz RF output; or IF: 50-200MHz

H-1SDI-DVBS

H-1SDI-DVBS-IF

1 HD/SD-SDI Input / L-Band RF DVB-S/S2 Output

1 HD/SD-SDI  Input / IF Output

 H-1HDMI-DVBS

H-1HDMI-DVBS-IF

 

1 HDMI video  Input / L-Band RF DVB-S/S2 Output

1 HDMI Input / IF Output

H-1CVBS-DVBS

H-1CVBS-DVBS-IF

1  CVBS Video Input / L-Band RF DVB-S/S2 Output

1 Analog CVBS Input / IF Output

H-1RGB-DVBS

H-1RGB-DVBS-IF

1  YPbPr Video  Input / L-Band RF DVB-S/S2 Output

1 YPbPr Video  Input / IF Output

   
Specification
low 70-250mn latency models  avialable
  • Input
SDI or HDMI or  YPbPr or CVBS up to 1080P60
  • Resolurion :

1280x720P 60 / 59.94 / 50 Hz
1920x1080I 60 / 59.94 / 50 Hz

1920*1080_60P, 1920*1080_50P, (-for MPEG4 AVC/H.264 only)

1920*1080_60i, 1920*1080_50i,

1280*720_60p, 1280*720_50P

720*480_60i, 720*576_50i

 

  • Video Codecs
MPEG-2 HD 1.5-19.5 Mbps
H.264 HD 0.8-19.5 Mbps
  • Audio Codecs
MPEG-1 Layer II
MPEG-2 AAC
MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough
  • Audio Sample Rate
48 kHz
  • Audio Bit Rates
64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
  • Outuput

DVB-S/S2 RF (IF Optional) output; ASI output

DVB-S/S2 Modulation Section

DVB-S QPSK: FEC 1/2,2/3,3/4,5/6,7/8

DVB-S2 QPSK: FEC 1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10

DVB-S2 8PSK FEC 3/5,2/3,3/4,5/6,8/9,9/10

RF output: 950.00-2150.00 MHz, 10Khz step

IF output: 50-200MHz (MODEL SPECIFIC)

Symbol rate: 0.05-20.0Msps

Roll Off: 0.35, 0.25, 0.2

Output level: -10db~-41.5db

  • RF Frequency Range
RF output: 950.00-2150.00 MHz, 10Khz step
  • RF Power Level
Output level: -10db~-41.5db
  • DVB-ASI Output
BNC Connector: 1-60 Mbps
  • DVB-ASI Input
BNC Connector: 1-120 Mbps
Programs Selected by PID
Programs Muxed to all Outputs
  • IPTV Output (Optional)
MPEG-TS MPTS over UDP
Unicast and Multicast Supported
  • Power Input
100-240 VAC Auto Switching
~ 20 W
  • Dimensions
19 x 17 x 2 Inches
  • Weight
9 Pounds
  • Operating Temperature
32-110 F
Question and Answers
Answer:
1) If that encoder needs to support 4:2:2, then we can do via external encoder : this is the only way we can do it, 2 separate units, one as an encoder second as a modulator H-MPEG2-H264-E2 , SDI input -ASI output, ( support 4:2;2) https://thorbroadcast.com/product/all-inputs-iptv-streaming-and-asi-hd-encoder-608-708-captioning-8230.html H-1SDI-DVBS2 DVBS2 Modulator ASI input - L-band Output https://thorbroadcast.com/product/sdi-to-dvb-s-s2-satellite-modulator.html/114 2) Yes, that is why you need both pieces, one unit to encode in 4 2 2 and the other unit takes a TS from the encoders ASI and modulates it to an RF channel.
Documents
downloadusers-manual.pdf
User's Manual is avalible only for logged users.
Similar products:

DVB-S/S2 Satellite Modulators

Carrier grade DVB-S & DVB-S2 satellite modulator for 3x redundant hot inputs for highest reliability and fall over protection. Provides latest generation support for 16APSK and 32APSK modulation constellations.

SDI to DVB-S / S2 / S2x Satellite Modulator with RF CID -Carrier ID and AES

H-XX-DVBS2X is an integrated SDI / HDMI / YPbPr HD Encoder and DVB-S/S2/S2X Modulator Encoding blades design makes it convenient to change encoding module between any video formats HD SDI, HDMI, YPbPr, CVBS AES. It is also 1 channel ASI input for external TS pass or multiplexing. It outputs DVB-S/S2/S2X RF (IF Optional ? model specific) and ASI. It supports currently required CID Carrier ID.

Contact Us

Thor Broadcast Sales


Customer Service/ Support