DVB S2 HD Satellite TV Lband and IF modulator

IF RF output model description

H-1SDI-DVBS-IF with IF (50-200mhz) RF output

Description

HD/SD-SDI 720p/1080i/1080p Encoder + Satellite DVB-S/S2 Modulator

It is integrated HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

DVB-S2 MODULATOR

It is integrated HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input , H.264 / MPEG2 encoding

It also have ASI input, ysor passing external TS from different encoder or muxes external TS with the TS our unit encoders.

Thor DVB-S/S2 Encoder & Modulator is an integrated HD Video Encoder with the sattelitte S2 modulator. Hot- swapable modules with diferent video inputs (CVBS/SDI/HDMI/YPbPr…) are available.

It has also 1 channel ASI input for external TS (MPEG2 or H.264) multiplexing . It outputs ASI and DVB-S/S2 RF (IF Optional) simultaneously.

The signal source could be SDI camera, HDMI Blue-ray players and etc. It has web-based NMS GUI interface for easy online management.

Featuring its high performance and low cost, the S2 is especially used by TV stations or DSNG systems to encode SD/HD programs and output to uplink.

CONFIGURATION PAGE FOR sATELITTE MODULATOR

Features

Convert HD-SDI or HDMI or Component YPbPr HD Video to Satellite modulated carrier
Any SDI or HDMI & YPbPr Inputs up to 720p/1080i/1080p
Licensed HDMI inputs
Closed Captions supported on 608 Analog Inputs
Support DVB-S/S2 RF (IF Optional - Model Specific) ) output and ASI output
Output Frequency: 950-2150MHz; or IF: 50-200MHz (Model Specific)
Support 10MHz reference clock
ASI Input for additional TS multiplexing from any other encoder
Fully IP control and Network Management through browser
Front Panel LCD local control
IPTV Output Unicast or Multicast IGMP UDP (optional)
ASI Output with multiplexer cherry picking
Low Latency available 70-120ms
AC3 Audio available (AC3 model)
MPEG2 Video or MPEG4 H.264 Encoding
Support RF 24V power output
Other Video Inputs cards available – Hot swappable - SDI Card, YpbPr Card, HDMI Card
5 Year Warranty - Free Tech Support - Cables and Power Supply included

Drawings

Model Selection

TWO MODELS AVAILABLE: L-band or IF (Intermediate Frequency)

1) H-1SDI-DVBS with ( 950Mhz - 2100Mhz) L-band RF output

2) H-1SDI-DVBS-IF with IF (50-200mhz) RF output

Base Main Model H-1SDI-DVBS2 has 1 HD/SD-SDI input and L-Band RF DVB-S/S2 Output

The configuration page for S2 modulator with L-band 950-2100 Mhz RF output; or IF: 50-200MHz
H-1SDI-DVBS H-1SDI-DVBS-IF	1 HD/SD-SDI Input / L-Band RF DVB-S/S2 Output 1 HD/SD-SDI Input / IF Output
H-1HDMI-DVBS H-1HDMI-DVBS-IF	1 HDMI video Input / L-Band RF DVB-S/S2 Output 1 HDMI Input / IF Output
H-1CVBS-DVBS H-1CVBS-DVBS-IF	1 CVBS Video Input / L-Band RF DVB-S/S2 Output 1 Analog CVBS Input / IF Output
H-1RGB-DVBS H-1RGB-DVBS-IF	1 YPbPr Video Input / L-Band RF DVB-S/S2 Output 1 YPbPr Video Input / IF Output

Specification

low 70-250mn latency models avialable

Input

SDI or HDMI or YPbPr or CVBS up to 1080P60

Resolurion :

1280x720P 60 / 59.94 / 50 Hz
1920x1080I 60 / 59.94 / 50 Hz

1920*1080_60P, 1920*1080_50P, (-for MPEG4 AVC/H.264 only)

1920*1080_60i, 1920*1080_50i,

1280*720_60p, 1280*720_50P

720*480_60i, 720*576_50i

Video Codecs

MPEG-2 HD 1.5-19.5 Mbps
H.264 HD 0.8-19.5 Mbps

Audio Codecs

MPEG-1 Layer II
MPEG-2 AAC
MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough

Audio Sample Rate

48 kHz

Audio Bit Rates

64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps

Outuput

DVB-S/S2 RF (IF Optional) output; ASI output

DVB-S/S2 Modulation Section
DVB-S QPSK: FEC 1/2,2/3,3/4,5/6,7/8
DVB-S2 QPSK: FEC 1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10
DVB-S2 8PSK FEC 3/5,2/3,3/4,5/6,8/9,9/10
RF output: 950.00-2150.00 MHz, 10Khz step IF output: 50-200MHz (MODEL SPECIFIC)
Symbol rate: 0.05-20.0Msps
Roll Off: 0.35, 0.25, 0.2
Output level: -10db~-41.5db

RF Frequency Range

RF output: 950.00-2150.00 MHz, 10Khz step

RF Power Level

Output level: -10db~-41.5db

DVB-ASI Output

BNC Connector: 1-60 Mbps

DVB-ASI Input

BNC Connector: 1-120 Mbps
Programs Selected by PID
Programs Muxed to all Outputs

IPTV Output (Optional)

MPEG-TS MPTS over UDP
Unicast and Multicast Supported

Power Input

100-240 VAC Auto Switching
~ 20 W

Dimensions

19 x 17 x 2 Inches

Weight

9 Pounds

Operating Temperature

32-110 F

Question and Answers

Question:
1) We are looking for full HDSD dvbs2 mpeg4 encoder+ modulator but with L-band output and 10mhz internal reference for a single channel. It must be able to handle 4:2:2 signal. 2) Can the encoder take in HD video embedded in 4 2.2 and output the same to modulator?

Answer:
1) If that encoder needs to support 4:2:2, then we can do via external encoder : this is the only way we can do it, 2 separate units, one as an encoder second as a modulator H-MPEG2-H264-E2 , SDI input -ASI output, ( support 4:2;2) https://thorbroadcast.com/product/all-inputs-iptv-streaming-and-asi-hd-encoder-608-708-captioning-8230.html H-1SDI-DVBS2 DVBS2 Modulator ASI input - L-band Output https://thorbroadcast.com/product/sdi-to-dvb-s-s2-satellite-modulator.html/114 2) Yes, that is why you need both pieces, one unit to encode in 4 2 2 and the other unit takes a TS from the encoders ASI and modulates it to an RF channel.