AUX204
Extend HD-SDI or SD-SDI and Network 10/100 Ethernet and RS Data /Analog Audio over single singlemode or multimode fiber
Transport up to eight full rate HD-SDI digital video signals at 1.5Gbps each and 10/100 Ethernet Full-Duplex over a single strand of fiber cable up to 20/40 or 80km long. In addition dual Aux ports provide additional capacity by adding up to 4 analog bi-directional audio, 2 full duplex RS-232/422/485 links, or 4 contact closure lines per Aux interface. The transmitter inputs support any serial digital signal up to HD-SDI, including SD-SDI or DVB-ASI digital video signals. The F-M8SDI-ET platform delivers more functionality and performance over a single fiber than has ever been available in off the shelf equipment.
Each of the 8 HD-SDI signals are fully isolated from each other and operate at a full 1.5 Gbps data rate. Each channel carries its own embedded audio and ancillary data and operates as if it were the only signal on the fiber. This is accomplished with TDM technology.
The 8 channel platform offers the same 5 pin Aux port custom signal options as the two and four channel units. However functionality is doubled by providing 2 independent Aux links that can be customized for 4 channel bi-directional or unidirectional audio, 1 or 2 duplex RS-232/422 links, or 4 line contact closure.
Base Model
F-M8SDI-ET -TX/RX support single mode fiber up to 20Km and it has ST/PC connector
|
Additional Model Selection : |
F-8MSDI-ET-TX/RX-XX-YY-ZZ-3G |
|---|---|
| XX = Optical connector : SC/PC , FC/PC (same price) | |
| YY = Fiber optic distance 40,60,80,100,120Km (add $) | |
| ZZ = (MM) Multi-mode, (SM) Single-mode (same price) | |
|
3G SDI supprted up to 3Gbps (add $) |
Addition Available AUX Cards: - (External Analog Audio, 10/100 Ethernet, Gigabit Ethernet, RS422, RS232) (add $)
AUX cards selection:
AUX204
![]() |
![]() |
1-channel bidirectional RS422
AUX205
![]() |
![]() |
2-channel bidirectional RS232
AUX206
![]() |
![]() |
2-channel bidirectional audio
AUX207
![]() |
![]() |
2-channel unidirectional audio output
AUX208
![]() |
![]() |
2-channel unidirectional audio input
AUX211
![]() |
![]() |
4-channel unidirectional audio input
AUX212
![]() |
![]() |
4-channel unidirectional audio output
AUX201
![]() |
![]() |
2-channel contact closure input
AUX200
![]() |
![]() |
2-channel contact closure output
![]() |
(External Analog Audio, RS422, RS232) (add $)
|
*All Specifiactions Subject to Change Without Notice |
|||
|
HD-SDI, SD-SDI, or DVB-ASI (ASI only for specific model-please call) 0 - 1.5 Gbps Serial Digital Signal |
||
|
8x HD-SDI (BNC) 1x 10/100 Ethernet Full duplex (RJ45 connector) |
||
|
> 380mVp-p |
||
|
75Ω |
||
|
BNC |
||
|
20Km (40, 60, 80, 100Km - specific models only) |
||
|
25×116×110 |
||
|
130 - 260 VAC @ 50-60 Hz |
||
|
<10W |
||
|
0 to +70 Degree |
||
|
0 to 95% |
||
|
ST/PC or ( SC/PC or FC/PC or LC PC or SC/APC or ST/APC or LC/APC) by request |
||
|
TDM or CWDM type |
||
|
Non-condensing |
||
|
|||
Thank you for your question and your interest in our products.
You will not be able to achieve this with the F-M8SDI-ET-Rx/RX because this unit includes Ethernet, which is bi-directional.
Multiple receivers would send the same data back to one transmitter, causing it to not work properly.
However, you could use:
With an optical splitter (1x2, 1x4, or 1x8), you could then use:
Please let me know if this solution would work for you. If so, kindly email me the quantity needed, and I will prepare a quote for you.
SDI + 10/100 Ethernet + RS485 Fiber Optic Blade for 16 CH Chassis
16 Ch SDI+2 10/100 ETHERNET+RS485 FIBER OPTIC BLADE OVER 2 MULTI-MODE FIBERS
1 channel SD/HD 3G SDI Fiber Extender 1080p/60hz
Up to 1080p/60hz 3G SDI Optical Fiber Extenders. It allows the transport of SDI, HD-SDI, and 3G SDI over distances up to 20km using single-mode fiber optic cable with ST/PC is standard Comparable to Telecast Rattlers.