Name: ATSC or QAM to IP gateway, ATSC QAM IPTV broadcast system - 8 x ATSC Inputs to IP
Brand: Thorbroadcast
Price: 3495 USD
Availability: InStock

Description

RF to IP Gateway

Broadcast FULL HD IPTV content from 8 TV frequencies that can be ATSC / QAM / DVBS-S2 / ISDB-T / DVB-T

AIR / Cable / SAT to LAN & WIFI IP Devices

EXAMPLE Model numbers can be ( H-8QAM-IP ---- H-8ATSC-IP ---- H-8DVBT-IP )

In today’s digital RF, each 6Mhz channel off air ATSC (8VSB) or CABLE TV QAM channels can contain many TV programs. For example 57Mhz is Ch #2, it can have programs 2.1, 2.3, and so on. This unit can convert all the TV programs inside the 8 frequencies and convert it directly to IPTV multicast or unicast, as well as, MUX'd ASI output. Unit features 2 ASI inputs as well, so it can be a multi ASI input to IP Gateway too.

Converts 8 Antenna RF (off air) or cable Frequencies (channels) / ALL Received TV Services from each > TO > IPTV Streaming SPTS
Output up to 45x spts RTP/UDP multicast streams you can receive on any computer, tablet, mobile, IP decoder

The 8 RF Tuner Input Multiplexer is the latest demodulation and multiplexing device for digital TV broadcasting head-end system with TS output through ASI and IP port. It can multiplex up to 8 channels tuned and 1 ASI input to one MPTS.This multiplexer has the functionality of supporting auto-generation of PSI/SI information, PID re-mapping, service filtering and PCR adjusting. This unit offers to be used in either MPTS format or SPTS allowing you to aggregate all your programs from the tuner, or parsing them through selection options in the program menu to customize the IP output. This units incredible integration and cost effective design make this device readily available is now widely used in the Next Generation of CATV Broadcasting system.

This is the simplest way to convert existing RF Channels to IP streams in a clear and direct manner, this unit does not encode, it is just a gateway so if the incoming cable QAM channels are MPEG2, then the output IP channels will be MPEG2, same goes with H264 as well. This is an easy to grab OTA or QAM frequencies and directly convert them to RTP/UDP Streams to an existing IPTV channel lineup

RF to IP Gateway + RF Transmodulator

Take existing Broadcast RF channels and convert them to IP streams PLUS convert them to RF channels

This unit can take existing ATSC channels and convert them to IP streams and QAM RF channels simultaneously (RF input = IP + RF output)

RF Inputs can be ATSC / QAM / DVBS-S2 / ISDB-T / DVB-T

RF Outputs can be ATSC / QAM / ISDB-T / DVB-T

EXAMPLE Model numbers can be: (H-8ATSC-IP-8ATSC ---- H-8ATSC-IP-8QAM ---- H-8QAM-IP-8ATSC ---- H-8QAM-IP-8QAM --- H-8DVBS-IP-QAM)

This gateway and transmodulator is a unique device that can easily convert existing RF streams, up to 8 frequencies and convert to IP and RF channels. This will allow you to add any RF to existing RF channel bank as well as create IP streams for easy access via LAN. For consideration you can convert DVB-T to IP and QAM, or you can convert ATSC to IP and QAM, or also use it as a translator so you can take 8 QAM frequencies and convert to IP and 8 QAM (different frequencies, if you like to rearrange your channel lineup). The vast array of options make this an ideal headend piece to quickly and efficiently become more dynamic, add free OTA channels to a QAM headend, or simply create a RF to IP gateway with existing RF programs. This is the exact same unit that is mentioned above with the added benefit of transmodulation, we can essentially mix and match any RF to any RF with a couple exceptions. Please contact your local dealer or Thor directly for more information.

Tags: Coax Multiplexer

Features

8 Tuner (DVB-S2/DVB-T)
8 Tuner (ATSC)
8 Tuner (QAM)
8 Tuner (ISDB-T)
QAM-256/64 & ATSC (8VSB) formats supported
IP TS output
MPTS over UDP, RTP/RTSP output as mirror of ASI output (RJ45)
SPTS optional as well
2 ASI Inputs means it can be used as a dual ASI to IP Gateway as well
Integrated demodulating and multiplexing functions
Select which channels to stream out via SPTS
Multiplex one program to all outputs
Closed Captions supported
Full IP control and Network Management through browser
IPTV Output Unicast or Multicast IGMP UDP
Low Latency available 10-20ms
AC3, MPEG2 Audio
MPEG2 Video or MPEG4 H.264
Perfect Full HD Video Quality - No Loss
2 Year Warranty

Drawings

Video

Antenna over IP, Send Multiple Air channels over network ATSC 8VSB RF to IPTV Multicast Streams

This Thor Broadcast H-8ATSC-IP unit has 8 independent ATSC tuners, each tuner can be set up to a different frequency. The unit will scan each one of them and show all the TV programs, all sub-channels, for example, channel 2.1, 2.2, 2.3, 2.4. Each one of subchannels will be converted to its own IPTV stream - multicast or unicast UDP/RTP or RTSP. Thor broadcast has allectio16 channels and with DVB-T, ISDB-T, QAM or satellite DVBS/S2 RF inputs : https://thorbroadcast.com/product/atsc-or-qam-to-ip-gateway-atsc-qam-iptv-broadcast-8230.html/70 Petit HDMI QAM ATSC DVB-T, ISDB-T Modulator : https://thorbroadcast.com/product/petit-hdmi-rf-modulator.html

Model Selection

Model	Description	Input
H-8ATSC-IP	8 x ATSC Antenna Tuners to IPTV	8 x ATSC Antenna
H-8QAM-IP	8 x CABLE QAM Tuners to IPTV	8 x CABLE QAM
H-DVBS2-IP	8 x Satellite S2 Tuners to IPTV	8 x Satellite S2
H-DVB-T-IP	8 x DVB-T Tuners to IPTV	8 x Satellite S2
H-ISDB-T-IP	8 x ISDB-T Tuners to IPTV	8 x Satellite S2
H-8ATSC-IP-8ATSC H-8ATSC-IP-8QAM H-8QAM-IP-8ATSC H-8QAM-IP-8QAM H-8DVBS-IP-8ATSC H-8DVBS-IP-8QAM H-8DVBS-IP-8DVBT H-8DVBT-IP-8QAM	8 ATSC to 8 ATSC and IP out 8 ATSC to 8 QAM and IP out 8 QAM to 8 ATSC and IP out 8 QAM to 8 QAM and IP out 8 DVBS/S2 to 8 ATSC and IP out 8 DVBS/S2 to 8 QAM and IP out 8 DVBT to 8DVB-T and IP out 8 DVBT to 8QAM and IP out

Specification

*All Specifications Subject to Change Without Notice
Input	PN: H-8ATSC-IP PN: H-8QAM-IP PN: H-8DVBS-IP PN: H-DVB-T-IP PN: H-ISDB-T-IP	8 x ATSC Antenna 8 x Cable QAM 8 x Satellite S2 8 x DVB-T Antenna 8 x ISDB-T Antenna
Supported Resolutions	All HD and SD
Video Codecs	MPEG-2 HD 1.5-19.5 Mbps H.264 HD 0.8-19.5 Mbps
Audio Codecs	MPEG-1 Layer II MPEG-2 AAC MPEG-4 AAC AC3 Dolby
Audio Sample Rate	48 kHz
Audio Bit Rates	64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps
Modulation Standard	ATSC, DVB-C, DVB-S2 (model dependent)
RF Frequency Range	30-960 MHz for QAM and ATSC, 850-2100Mhz for L-band
Input RF Power Level	5-35 dBmV
IPTV Output	MPTS over UDP, RTP/RTPS out as mirror of ASI output (RJ45)
Power Input	100-240 VAC Auto-Switching ~ 20 W
Dimensions	19 x 9 x 3 Inches
Weight	6 Pounds
Operating Temperature	32-110 F

Question and Answers

Question:

We currently have one unit that does what we are looking for but currently were experiencing some issues and also would like to have other another vendor option so were not locked into just this one piece of equipment. So just a quick recap on what we discussed regarding what we’re looking for in this Encoder. We need it to be capable of receiving 8 separate ATSC and or QAM signals. Each input being capable of outputting all of the programs or cherry picking individual programs and outputting simultaneously to a QAM modulator and IP address which can support Unicast or multicast. Each output having a dedicated QAM channel and IP address and port #. QAM modulator that outputs 8 RF carriers and provides a minimum of 25dBmV but preferably 40dBmV. EAS is also a big one for us. We would like for the EAS to be able to override the current programs with the EAS message when the EAS alert is detected. Our EAS is a multicast stream with a dedicated port # and when this dedicated multicast IP and port # is detected it automatically overrides all programs with the EAS message for the duration of the EAS message. We have some equipment that is capable of just detecting the EAS stream and overriding the programs that way and other equipment requires a trigger in the form of a dry contact along with the EAS IP Stream. I imagine that is software related.

Answer:

This is the perfect solution for you : 8 x ATSC or Satellite Antenna Tuners to IPTV & ASI Output H-8QAM-IP H-8ATSC-IP Or this one 4 X Satellite or ATSC IRD Decoder to IP, ASI H-IRD-V4-ATSC H-IRD-V4-QAM this is a link : https://thorbroadcast.com/product/4-x-satellite-or-atsc-ird-decoder-to-ip-and-8230.html

Question:

I need a device that will intake the OTA signal and convert it to QAM output. Need 16 or 32 QAM.

Also, I need information on the 16 QAM to Ip

Answer:

We have 16 RF tuners to IP and 16 tuners to IP + RF Out

They can be configured and ordered with different modulation type tuners.

One group converts RF to IP only

The second RF to IP and RF out ( it works as an IP gateway and RF to RF Transmodulator )

Please find my answers below:

I need a device that will intake the OTA signal and convert it to QAM output. Need 16 or 32 QAM.

the best unit to do that is

H-16ATSC-IP-16QAM : 16 ATSC to 16 QAM and IP out

https://thorbroadcast.com/product/16-rf-tuners-to-iptv-ts-qam-output.html/116

Also, I need information on the 16 QAM to Ip and product for OTA signal to QAM

H-16QAM-IP - 16 QAM to IP Gateway

OTA signal to QAM

H-16ATSC-IP-16QAM : 16 ATSC to 16 QAM and IP out

Question:

i want a device that takes analogue and digital (qam 32,256) through cable and give output in the form of spts ip

Answer:

Yes the ideal product for QAM to IP , the unit has 16 independent tunes ,i can be tuned to any QAM frequency, any program muxed on this frequency, will be available as a UDP multicast SPTS stream

https://thorbroadcast.com/product/16-rf-tuners-to-iptv-ts-qam-output.html/117

Please check and let me know if that would work for you.

However unfortunately we do not make any Gateways that make Analog NTSC RF to IP.

For the analog channels, those would need to be decoded to CVBS video / audio or to HDMI using Analog STB's and connect them to the Video Encoders like this one:

H-4ADHD-QAM-IP-LL 4ch CVBS or HDMI inputs

https://thorbroadcast.com/product/4-hdmi-component-hd-to-coax-and-iptv-hd-8230.html/21

4-24ch HDMI encoders :

https://thorbroadcast.com/product/4-8-16-24-hdmi-iptv-streaming-8230.html/216

Question:

I'm interested in using an RF to IP gateway and have a few questions about its setup:

If I connect a single coaxial cable from a high-powered antenna (which picks up all available over-the-air ATSC channels) to the RF input of the gateway, will the device be able to detect multiple OTA channels, such as Channel 2 and its subchannels, as well as Channels 4, 5, 11, and their subchannels? Can it break these channels into separate IP streams?

I’ve seen a setup where an Ethernet line connects to a switch, and from the switch, multiple feeds go to tuners or TVs. In this case, does the switch need to be an unmanaged switch, or does it need to support specific protocols for the network to function correctly?

Answer:

The ATSC model will pick up all the minor channels behind the major channel. The OTA inputs can be set to any non-adjacent carrier and converted to IP UDP unicast, multicast streams.

You can use an unmanaged switch; but that is more relevant to how you plan on using the device. Generally speaking all modern switches come equipped with all the necessary means to ensure interoperability You can plug in multiple Gateways into a switch as well.

Specifically the options with this model areUDP, RTP and RTSP. Your network should be able to handle that, but also make sure you have the bandwidth available (depending on how many OTA channels you decide to convert to IP).

Documents

h-8atsc-ip-manual.pdf

data-sheet.docx

Availability:	In stock	Condition:	new
Shipping:	starting at $10	Warranty:	2Yrs

ATSC or QAM to IP gateway, ATSC QAM IPTV broadcast system

Description

RF to IP Gateway

Features

Drawings

Video

Model Selection

Specification

Question and Answers

Question: I need a device that will intake the OTA signal and convert it to QAM output. Need 16 or 32 QAM. Also, I need information on the 16 QAM to Ip

Question: i want a device that takes analogue and digital (qam 32,256) through cable and give output in the form of spts ip

Documents

Question:

I need a device that will intake the OTA signal and convert it to QAM output. Need 16 or 32 QAM.

Also, I need information on the 16 QAM to Ip

Question:

i want a device that takes analogue and digital (qam 32,256) through cable and give output in the form of spts ip