ASI streaming

Best ASI streaming products


ASI streaming: what you need to know


This standard has been known around the world for many years and although it may seem that it has been somewhat forgotten, that’s not the case. ASI is still doing well and is commonly used among professionals (and not only). The tech geeks certainly know ASI streaming inside out. However, if you are just a beginner in the world of technology or in the broadcasting industry, you would probably want to learn fast as much as possible about streaming, available standards, and devices supporting these standards. Let's start with ASI streaming!
 


What does ASI stand for? What is ASI streaming about?


ASI stands for Asynchronous Serial Interface. Does it ring a bell in your mind? Probably not but don’t be upset - the average users of computers, TV or commercial cameras don’t deal with the ASI standard on a daily basis. This does not mean, however, that it is not worth getting interested in this method of MPEG Transport Stream (MPEG-2 or MPEG-4). You can never have enough knowledge so get ready and let’s roll! Like the SDI standard, ASI allows MPEG data to be transmitted at a constant rate of up to 270 megabits per second. There are two commonly used transmission formats for the ASI standard: 188-byte format (more common) and 204-byte format (less common).


The unmodulated ASI signal is transmitted from the studio over a coaxial cable to the end equipment, which then transmits the broadcast program to the people watching TV. If the ASI signal is sent over a coaxial cable, it is possible to provide compressed SD, HD and audio programs (one or multiple programs). It is now also possible to use an optical fiber to send the ASI signal but the most popular solution is still the traditional 75-ohm coaxial cable, terminated with BNC male connectors on each end. Moreover, it is also possible to send ASI data wireless. The ASI standard belongs to the group of standards known as DVB (Digital Video Broadcast). As you can see, the average viewer often deals with ASI streaming without even knowing about its existence.


List of the Best ASI Streaming devices


This device is a 1 channel DVB-ASI or SD-SDI transmitter and receiver for sending digital video signals over fiber optic cable for distances up to 120Km singlemode or 2000ft multimode. This unit can also incorporate CWDM or DWDM optics for high-density systems.

Features

• General Purpose Copper to Fiber Serial Converter
• Transport ASI over Fiber or SD SDI over Fiber
• 0.5 Mbps to 270 Mbps Bandwidth
• 1 - 8x Copper Port: BNC with Equalization
• 1 x Singlemode or Multimode Fiberoptic Port
• up to 110km Transmission Range (20km Standard)
• Single Fiber Transmission
• Plug-n-Play
• Bidirectional Transmission Available
• Both Compact and Rackmount Units Available
• Applications include extending video signals over fiber
• Common markets include broadband and broadcast industries

This Unit is an ASI to IP or IP to ASI converter or BiDirectional DVB ASI over IP Gateway for MPEG 2 / MPEG 4 Transport Streams over Ethernet Networks. This Unit ASI to IP gateway offers a simple and reliable method for MPEG 2 / 4 transport of ASI video over private or public IP Etherent

Features

  • Powerful embedded CPU enabling stable and reliable performance
  • Complete Ethernet protocol, providing 100M/1000M Base-T network interface
  • UDP connection mode, specially designed for video data application
  • DVB ASI loop out
  • USB interface
  • Communication protocol and remote control software package
  • Compact design, easy to mount
  • Output/Input status indicators, easy to operate.
     
This Unit has DVB-ASI input and can modulate on any CATV RF QAM carier video TS streams - QAM or ATSC or DVB-T or ISDBT

Features

  • Fully complying with DVB-C(EN300 429), ITU-T J.83A/B/C standard
  • Symbol rate adjusting range: 5.0Msps~9.0Msps
  • Five constellation modes: 16QAM, 32QAM, 64QAM, 128QAM and 256QAM
  • ATSC, DVB-T, ISDB-T modulations avaialble - model dependent
  • ASI input
  • DATA output via RJ45 - Mulitcast and Unicast, RTP,RTSP,UDP
  • Scrambler
  • Web NMS Interface
  • SNMP
  • Huge buffer memory for the burst code stream
  • Intelligent null packet deleting, automatically TS filling
  • PCR accurate adjusting
  • NIT insertion
  • PID filtering, re-mapping and PSI/SI update synchronously
  • Output frequency range: 30MHz~1000MHz in 1 kHz step
  • Output frequency attenuation range: -16dBm~+12dBm in 0.5dB step
  • LCD and keyboard operation
  • NMS operation

Who uses ASI streaming?



Despite the emergence of more and more modern solutions, ASI streaming data format is widely used in the broadcasting industry and is still very popular among professionals in this industry. In the television industry, the studio sends the ASI signal to transmission devices before sending data to viewers sitting in front of their TVs. Who else deals with ASI on a daily basis? Next to the broadcasting industry, the ASI standard is also commonly used in interfacility links and telephony communications.


Technological development and global Internet access have also affected the ASI. More and more TV stations, both local and nationwide, switch to the Internet and begin to broadcast some of their channels over the Internet. Broadcasting a live program online helps to reach a much larger audience than traditional television broadcasting. Moreover, it is also simply cheaper. However, many stations still have equipment that supports the ASI standard and coaxial cables. Can you still make use of them? Absolutely. All you need to do is get compatible devices, such as converters, that enable ASI signal transmission over the Internet. If you buy the right devices, the equipment supporting ASI can also be connected to modern HDMI cameras and other recording equipment.

The most important facts about ASI

  • ASI standard was introduced by Time Warner Cable in 1983 (in 204-byte format).
  • The 75-ohm coaxial cable is commonly used to carry ASI signal. However, it is possible to send ASI data wirelessly or over fiber optic cable.
  • The ASI standard still dominates the broadcast industry. You can also find ASI standard in telephony communications and interfacility links.
  • ASI streaming data format enables the transfer of MPEG2 and MPEG4 data, which are the most common protocols used for real-time transport of video and audio in the broadcasting industry.
  • Data is sent at a constant rate which does not exceed 270 Mb/s.
  • The most popular transmission format of the ASI standard is 188 bytes. There is also a 204-byte format.
  • Data is transferred in a compressed format.
  • The ASI signal is first transferred from the studio to the final transmission equipment, and only then sent to viewers sitting in front of their TV sets.
  • Nowadays it is possible to connect equipment supporting the ASI standard to devices that support modern standards, e.g. HDMI (and the other way around). You can find these products, on the Internet or in local shops, many devices designed for this purpose, e.g. converters. That way it is also possible to use ASI standard in online streaming.


***


There has been a lively discussion among tech geeks about the future of ASI streaming in the face of the emergence of cheaper, more practical and more modern solutions. One would say that the cables are out of fashion. If you, however, take a look at the broadcasting industry, you can see that ASI streaming data format is still doing well and it is highly unlikely that it will disappear from the world of professional video equipment within the next few years. 



Contáctenos

Thor Broadcast Ventas


Servicio al Cliente / Soporte





Formulario de contacto

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
*necesario