High Definition Multimedia Interface (HDMI) has been a widely used digital data transmission system for several years now, characterized by high quality and transmission density at simultaneous very low power losses. This electronic connector is a proprietary audio/video interface for transmitting uncompressed video data and compressed or uncompressed digital audio data from an HDMI-compliant source device, such as a display controller, to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI is a digital replacement for analog video standards.
Integrated Services Digital Broadcasting (ISDB) is an MPEG-2 based standard for digital media broadcasting. Introduced in 1999 in Tokyo, it provides for the distribution of HDTV, SDTV, audio and text in three variants: ISDB-T, ISDB-S and ISDB-C. ISDB-T allows several modulation methods that do justice to the diverse contents. In a bit pattern, the information can be accommodated in such a way that mobile terminals receive data in reduced quality with lower bandwidth (mobile television). Other devices receive supplementary information that improves the quality of the images. In Japan, 1seg will broadcast audio, video and data services via ISDB-T standard radio transmissions. ISDB-T is called SBTVD (also known as ISDB-Tb) as a wireless digital television broadcast in Brazil. Argentina and Peru are said to have already adopted the ISDB-T standard. In countries such as Bolivia, Chile, Ecuador and Venezuela, the standard for digital terrestrial television and radio is still being tested.
This Device is a CMOD series compact Encoder Modulator with support for the Dolby AC/3 Audio Codec. This model line provides support for legacy USA tuners requiring the AC/3 audio codec for proper decoding.
Features
HDMI Input up to 1.5A @1080p60
HDCP licenced
Play any recorded TS file from USB Drive
1 HDTV Carrier RF Output full HD 1080p60
Record Live HD Video Input to USB TS File
Loop content from USB drive continuously
1 HDTV Carrier RF Output full HD 1080p60
Record Live HD Video Input to USB TS File
Loop content from USB drive continuously
AC3 Audio Encoding Avialable (model number specific)
Integrates fully independent encoders with a TS Generator and modulator
Available for most world RF channel formats: QAM, ATSC, DVB-C, DVB-T
Supports full HD 1080p60 input & encoding from any HDMI input source
Models supporting AC3 Dolby audio have official licenced encoding chipsets
USB storage feature for recording input and playing TS files from any source
Adjustable output power eliminates the need for RF amplifier, > +40 dBmV
Supports alternate encoding cards for application specific projects- Inquire
Support CC (Closed Caption) EIA608 (from CVBS input)
1-4 CATV RF Output up to 4 Adjacent channels
QAM-256/64, DVB-T & ATSC formats available
Fully IP Control and Network Management through browser
Front Panel LCD local control
IPTV Output Unicast or Multicast IGMP UDP, RTP / RTSP
ASI Output multiplexer with cherry picking
Low Latency available 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
Dolby AC3 or MPEG1/2 Audio Encoding
MPEG2 or MPEG4 H.264 Video Encoding
Firmware for ATSC, DVB-T, DVB-S2 Available
VCT (Virtual Channel Table) support for DVB-C and ATSC
This unit has 2 HDMI and 2 SDI inputs with RF CATV QAM and ATSC output. You can broadcast over existing coaxial cabling to an unlimited number of televisions in FULL HD
Features
Convert 2 HDMI & 2 SDI HD Video Content programs to Perfect QAM Channels simultaneously
Any 2 HDMI & 2 SDI Inputs up to 720p/1080i/1080p
Licensed HDMI inputs
2 HDMI and 2 BNC cables FREE
Support DD AC3 (2.0/5.1/7.1) passthrough(for HDMI interface only)
Support CC (Closed Caption) EIA608,and EIA708 on SDI’s
1-4 CATV RF Output up to 4 Adjacent channels
QAM-256/64, DVB-T, & ATSC formats available
Fully IP control and Network Management through browser
Front Panel LCD local control
IPTV Output Unicast or Multicast IGMP UDP/RTP/RTSP
ASI Output with multiplexer cherry picking
Low Latency available 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
Dolby AC3 Audio encoding and Doby AC3, 5.1 Pass-Trough
MPEG2 Video or MPEG4 H.264 Encoding
Firmware for DVB-C, ATSC, DVB-T, DVB-S2, ISDB-T Available
VCT (Virtual Channel Table) support—for DVB-C ATSC and DVB-T
This Unit has 12 HDMI inputs which are beeing converted to CABLE TV Channels for easy HD video distribusion over COAX. In addition it also has IPTV output for IP Network Multicast
HD (1080i/720p) to SD (576p/480p) downscale conversion
1MPTS and 24 SPTS IP (DATA1 and DATA2 port) output over UDP, RTP/RTSP
ASI output mirrors one of the RF carriers
PID remapping/ accurate PCR adjusting/PSI/SI editing and inserting
Control via web management NMS
16 Groups Multiplexing/Scrambling/ DVB-C QAM ANNEX A and B Modulating (based on RF)
8 Groups Multiplexing/ DVB-T/ATSC Modulating (based on RF)
6 Groups Multiplexing / ISDB-T Modulating (based on RF)
Up to 16 MPTS IP (Data2 Port Only) output over UDP, RTP/RTSP (# of MPTS is based on RF standard of device) (16MPTS for DVB-C; 8MPTS for DVB-T/ATSC; and 6MPTS for ISDB-T)
Thor Universal multi-channel SDI and HDMI Modulator with QAM, ATSC, DVB-T, or ISDB-T coax RF output
Features
8 Independent HDMI and SDI Inputs - (individually selectable for each of the 8 channels you can output)
HDMI is HDCP compliant for use with any source
SDI Inputs include support for Closed Caption 708
Outputs 8 separate Clear CATV RF channels QAM / ATSC - 8VSB / DVB-T / ISDB-T (selectable in the GUI)
RF output on each of the 8 RF channels can be individually set to a frequency and modulation standard (2 on QAM, 3 on ATSC, 4 on ISDBT, etc)
DVB-C Annex A and B - QAM 64, QAM 256
Supports full HD video up to 1080p/59.94/60, other resolutions included are 1080i, 720p, 480i also supported
Low Latency supported; 2 different latency settings - 500/1000ms
Video encoding rate up to 25Mbps
MPEG2 Video Encoding
Dolby AC3 and MPEG1 Layer 2, & AAC audio encoding
VCT - Virtual channel number and Name supported
Frequency - 50Mhz to 900Mhz
NMS web interface controllable
Easy to use web Gui Interface (setup and status)
LED's Status on front panel shows HDMI in blue or SDI in green for easy to see video detect link
LCD Display and front panel control buttons for setup, control and status
Powerful processing with the best MPEG2 video encoding chip
First High Density HDMI and SDI input modulator on the market
Lowest cost per channel in perfect HD resolution for any application from Live Sports, House of Worship, Concerts, Theaters, Malls, Airports, Hotels, Military, Private Enterprise
This Modulator is an all in one device Integrating HD MPEG2 encoding with AC3 Dolby Audio and Closed Captioning input. This Unit Converts HD Audio and Video signals from any device into DVB-C/T / ATSC / ISDB-T RF output. This Unit is a Digital HDMI Encoder and RF CATV ATSC Modulator with Closed Captioning Input and Network Ethernet browser contol.
Features
HDMI Input - HDCP compliant ( works with any HDMI device )
10/100 Ethernet NMS port for control, setup, and monitoring
Supports CC (Closed Captioning)
RF output could be set to any CATV format as QAM, ATSC, DVB-T, or ISDB-T
RF output power is +24dbmv; enough for distributing HDTV video to 100's TV over existing Coax cable
RF power could be controlled over the network via NMS Gui (Proprietary)
MPEG2 video encoding
AC3 Audio encoding
Video bit rate 1-19.5Mbps can be controlled over the network
Supports any CATV RF agile channels form 57-1000Mhz, channels 2 -135,
Designed by Thor Broadcast, these devices that allow for efficient, effective and reliable cooperation between HDMI connectors and Integrated Services Digital Broadcasting (ISDB) is the only complete and full range offer of this type of converter available on the market.
EN
