HDMI over COAX

Best HDMI over COAX converters

HDMI over Coax conventers enable you to send HDMI signal over great distances and make it easy to distribute that signal to many endopints. Choosing the perfect device may be quite a challenge. Here you can get acquainted with the two juxtapositions which were prepared by using some products from the Thor Broadcast’s offerings. We hope that reading this will make the decision process much easier.
 

Best Hdmi over Coax Converters and Extenders


Below you may find a list of some of Thor's most popular devices for HDMI over Coax which have been installed and used over the whole world. 

Digital modulator for HD video distribution over coax - QAM, ATSC, DVB-T. Broadcast to unlimited TVs with FULL HD live HDMI video as Cable TV & IPTV channels

Features

  • Integrates fully independent encoders with a multiplexer and modulator
  • Modulates up to 4 adjacent QAM-256 carriers with up to 38 Mbps each
  • Supports full HD 1080p60 input & encoding from any HDMI digital video source
  • Each encoder independently configured: supports all standard HDTV resolutions
  • IPTV output on second network port in UDP IGMP Multicast or Unicast format
  • DVB-ASI output on mirrored BNC terminals for use in broadcasting systems
  • Fully network managed device with all settings configurable through web browser
  • Conversions : HDMI to RF, HDMI to IP, HDMI to ASI
  • Any 1-4 HDMI Input up to 720p/1080i/1080p60
  • Licensed HDMI inputs
  • 1-4 CATV RF Output up to 4 Adjacent channels
  • QAM-256/64
  • Fully IP control and Network Management through browser
  • Front Panel LCD local control   
  • IPTV Output Unicast or Multicast IGMP UDP, RTP/RTSP
  • ASI Output with multiplexer cherry picking
  • Low Latency available 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
  • AC3 Audio available (AC3 model)
  • MPEG2 Video or MPEG4 H.264 Encoding
  • Firmware for ATSC, DVB-T, DVB-S2 Available
  • 2  slot design – Other Video Inputs cards available –Hot swappable - SDI Card, YpbPr Card.
  • 2 Years warranty
best hdmi tv modulator with ATSC output

Features

  • ATSC 8VSB 19Mbps RF Output up to 4 Out
  • IPTV Output Unicast or Multicast IGMP UDP, RTP/RTSP
  • ASI Output with multiplexer cherry picking
  • Any HDMI Input up to 1.5A @1080p60
  • ASI Input SPTS or MPTS up to 120 Mbps
  • Fully Network Managed through browser
  • Integrates fully independent encoders with a multiplexer and modulator
  • Modulates up to 4 adjacent 8VSB carriers compatible with ATSC format
  • Supports full HD 1080p60 input & encoding from any HDMI digital video source
  • Each encoder independently configured: supports all standard HDTV resolutions
  • IPTV output on second network port in UDP IGMP Multicast or Unicast format
  • DVB-ASI output on mirrored BNC terminals for use in broadcasting systems
  • Fully network managed device with all settings configurable through web browser
  • 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
Convert HD video signals to full HD digital DVB-T television channels for display on any TV. Broadcast over your existing Coaxial Cabling to an unlimited number of Televisions with FULL HD

Features

  • Conversions : HDMI to RF DVB-T , HDMI to IP, HDMI to ASI
  • Any 1-4 HDMI Input up to 720p/1080i/1080p60
  • Licensed HDMI inputs
  • 1-4 CATV RF Output up to 4 Adjacent channels
  • QPSK QAM-16/26 RF Out up to 4 Adjacent
  • Fully IP control and Network Management through browser
  • Front Panel LCD local control   
  • IPTV Output Unicast or Multicast IGMP UDP,RTP/RTSP
  • ASI Output with multiplexer cherry picking
  • Low Latency available  Low Latency available 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
  • AC3 Audio available (AC3 model)
  • MPEG2 Video or MPEG4 H.264 Encoding
  • Firmware for ATSC, DVB-T, DVB-S2 Available
  • 2  slot design – Other Video Inputs cards available –Hot swappable - SDI Card, YpbPr Card.
  • 5 Years warranty
  • Any HDMI Input up to Full HD @1080p60
  • ASI Input SPTS or MPTS up to 120 Mbps
  • Integrates fully independent encoders with a multiplexer and modulator
  • Modulates up to 4 adjacent QPSK, QAM-16/64 carriers with up to 28 Mbps each
  • Supports full HD 1080p60 input & encoding from any HDMI digital video source
  • Each encoder independently configured: supports all standard HDTV resolutions
  • IPTV output on second network port in UDP IGMP Multicast or Unicast format
  • DVB-ASI output on mirrored BNC terminals for use in broadcasting systems
  • Fully network managed device with all settings configurable through web browser
The best HDMI modulator for professional and commercial use, offering 4-channel HDMI input and QAM coax, as well as IPTV output

Features

  • Broadcast over existing Coaxial Cabling to an unlimited number of Televisions with FULL HD
  • Perfect for Professional Stadiums and Arena's
  • #1 in Live Sports and Entertainment 
  • Broadcast Live HDMI & YPbPr Video as Cable TV & IPTV Channels.
  • Licensed HDMI inputs - works with any source like DVD, Blu-Ray, or any STB
  • Convert HDMI & Component YPbPr HD Video to HDTV Channels
  • Any 1-4 HDMI & YPbPr Inputs up to 720p / 1080i / 1080p
  • Licensed HDMI inputs - works with any source like DVD, Blu-Ray, or any STB
  • 4 HDMI Cables FREE
  • Support DD AC3 (2.0 / 5.1 / 7.1) passthrough (for HDMI interface only)
  • Support CC (Closed Caption) EIA608 (from CVBS input)
  • 1-4 CATV RF Output up to 4 Adjacent channels
  • QAM-256/64, DVB-T & ATSC formats available
  • Fully IP Control and Network Management through browser
  • Front Panel LCD local control   
  • IPTV Output Unicast or Multicast IGMP UDP, RTP / RTSP
  • ASI Output multiplexer with cherry picking
  • Low Latency available 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
  • Dolby AC3 or MPEG1/2 Audio Encoding
  • MPEG2 or MPEG4 H.264 Video Encoding
  • Firmware for ATSC, DVB-T, DVB-S2 Available
  • VCT (Virtual Channel Table) support for DVB-C and ATSC
  • LCN (Logical Channel Number) support

 

This unit converts 4 RF Satellite/ATSC/QAM or ASI to QAM. Transmodulator: ATSC to QAM, CATV RF, QAM to ATSC, QAM, Satellite RF to QAM, Satellite to ATSC, Satellite to QAM.

Features

  • Modulate 4 RF carriers including all sub programs and streams
  • Provides industry standard multiplexed and remapped outputs on ASI & IP
  • 9x IP stream outputs (8 SPTS, 1 MPTS) in UDP, RTP, or RTSP video protocols
  • Advanced network managment system on dedicated network port and IP address
  • Modulator available in QAM (DVB-C), Satellite (DVB-S2) or OTA (DVB-T) -- (model dependant)
  • Supports Closed Caption 608 and 708 systems, supports Dolby AC/3 Pass Through
  • H-4-DVBS2-QAM      4 satellite LNB’s RF + 2 ASI’s to QAM and IP
  • H-4ATSC-QAM-IPLL   4 ATSC RF +2 ASI’s to QAM and IP
This unit has 2 HDMI and 2 SDI inputs with RF CATV QAM and ATSC output. You can broadcast over existing coaxial cabling to an unlimited number of televisions in FULL HD

Features

  • Convert 2 HDMI & 2 SDI HD Video Content programs to Perfect QAM Channels simultaneously
  • Any 2 HDMI & 2 SDI Inputs up to 720p/1080i/1080p
  • Licensed HDMI inputs
  • 2 HDMI  and 2 BNC cables FREE
  • Support DD AC3 (2.0/5.1/7.1) passthrough(for HDMI interface only)
  • Support CC (Closed Caption) EIA608,and EIA708 on SDI’s
  • 1-4 CATV RF Output up to 4 Adjacent channels
  • QAM-256/64, DVB-T, & ATSC formats available
  • Fully IP control and Network Management through browser
  • Front Panel LCD local control   
  • IPTV Output Unicast or Multicast IGMP UDP/RTP/RTSP
  • ASI Output with multiplexer cherry picking
  • Low Latency available 300/500/800ms delay via different modes - IP will always be closer to 800ms due to the decoding (these values are end to end, not just the encoding speed)
  • Dolby AC3 Audio encoding and Doby AC3, 5.1 Pass-Trough
  • MPEG2 Video or MPEG4 H.264 Encoding
  • Firmware for DVB-C, ATSC, DVB-T, DVB-S2, ISDB-T Available
  • VCT (Virtual Channel Table) support—for DVB-C  ATSC and DVB-T
  • LCN (Logical Channel Number) support
This Unit has 12 HDMI inputs which are beeing converted to CABLE TV Channels for easy HD video distribusion over COAX. In addition it also has IPTV output for IP Network Multicast

Features

  • 12 HDMI inputs with 12 CC inputs via CVBS
  • (Data 1 port) over UDP and RTP
  • MPEG1 Layer II; Dolby AC3, AC3 pass through ; MPEG-2 AAC, MPEG-4 AAC
  • HD (1080i/720p) to SD (576p/480p) downscale conversion
  • 1MPTS and 24 SPTS IP (DATA1 and DATA2 port) output over UDP, RTP/RTSP
  • ASI output mirrors one of the RF carriers
  • PID remapping/ accurate PCR adjusting/PSI/SI editing and inserting
  • Control via web management NMS
  • 16 Groups Multiplexing/Scrambling/ DVB-C QAM ANNEX A and B  Modulating (based on RF)
  • 8 Groups Multiplexing/ DVB-T/ATSC Modulating (based on RF)
  • 6 Groups Multiplexing / ISDB-T Modulating (based on RF)
  • Up to 16 MPTS IP (Data2 Port Only) output over UDP, RTP/RTSP (# of MPTS is based on RF standard of device) (16MPTS for DVB-C; 8MPTS for DVB-T/ATSC; and 6MPTS for ISDB-T)
1-8 HDMI RF Modulator with Closed Captioning: All-in-one device for MPEG2 encoding and modulation, converting audio/video signals to ATSC, DVB-C, QAM, DVB-T, ISDB-T RF output

Features

  • 1-8 HDMI channels Inputs (model dependent)
  • HDCP compliant works with any HDMI source like DVD Player or Cable, Satellite STB up to 1080p/60 resolution
  • MPEG2 Video Encoding
  • 1080p/60, 1080i, 720p, 576i, 480i Video Resolution
  • Low Latency (200~600ms)
  • MPEG layer 2, AAC, and DD AC3 Audio Encoding
  • CC (Closed Caption), EIA 608
  • LCN
  • DVB-C DIGITAL QAM, ATSC, DVB-T, ISDB-T RF in one device, Modulation dynamic switching
  • Control Via Web-Based NMS, and easy updates Via Web
  • LCD Display and front panel control
Thor Universal multi-channel SDI and HDMI Modulator with QAM, ATSC, DVB-T, or ISDB-T coax RF output

Features

  • 8 Independent HDMI and SDI Inputs - (individually selectable for each of the 8 channels you can output) 
  • HDMI is HDCP compliant for use with any source
  • SDI Inputs include support for Closed Caption 708
  • Outputs 8 separate Clear CATV RF channels QAM / ATSC - 8VSB / DVB-T / ISDB-T  (selectable in the GUI)
  • RF output on each of the 8 RF channels can be individually set to a frequency and modulation standard (2 on QAM, 3 on ATSC, 4 on ISDBT, etc)
  • DVB-C Annex A and B - QAM 64, QAM 256
  • Supports full HD video up to 1080p/59.94/60, other resolutions included are 1080i, 720p, 480i also supported
  • Low Latency supported; 2 different latency settings - 500/1000ms 
  • Video encoding rate up to 25Mbps
  • MPEG2 Video Encoding
  • Dolby AC3 and MPEG1 Layer 2, & AAC audio encoding
  • VCT - Virtual channel number and Name supported
  • Frequency - 50Mhz to 900Mhz
  • NMS web interface controllable
  • Easy to use web Gui Interface (setup and status)
  • LED's Status on front panel shows HDMI in blue or SDI in green for easy to see video detect link
  • LCD Display and front panel control buttons for setup, control and status
  • Powerful processing with the best MPEG2 video encoding chip
  • First High Density HDMI and SDI input modulator on the market
  • Lowest cost per channel in perfect HD resolution for any application from Live Sports, House of Worship, Concerts, Theaters, Malls, Airports, Hotels, Military, Private Enterprise
HDMI Modulator with Closed Captioning, converting signals into Digital QAM ATSC COAX output

Features

  • 1-8 HDMI channels Inputs (model dependent)
  • 8 Ch CVBS input (H-Thunder-8 only)
  • HDCP compliant works with any HDMI source like DVD Player or Cable, Satellite STB up to 1080p/60 resolution
  • MPEG2 Video Encoding
  • 1080p/60, 1080i, 720p, 576i, 480i Video Resolution
  • Low Latency (500~1000ms)
  • MPEG layer 2, AAC, and DD AC3 Audio Encoding
  • CC (Closed Caption), EIA 608
  • LCN
  • DVB-C DIGITAL QAM, ATSC, DVB-T, ISDB-T RF in one device, Modulation dynamic switching
  • Control Via Web-Based NMS, and easy updates Via Web
  • LCD Display and front panel control

 

Things you need to know about buying Hdmi over Coax modulator

  • Think, where you would like to use the device – some appliances tend to perform better at home and other ones are dedicated for wider usage, for example in hotels. The amount of appliances which you want to connect to the converter is also crucial.
  • Make sure, that your devices will be compatible with the conventer you are going to buy - check the cable length, resolution, supported standards or the technology offered by the manufacturer.
  • Compare different conventers wisely – higher price doesn’t only mean a higher quality product, but also a range of extra accesories like cables or necessary installation elements. Think about your needs, read the descriptions of devices carefully and don’t forget about take a look at other customers’ reviews.
  • Popular usage includes hotels, casinos, stadiums, house of worship, bars and restaurants, private headends and theme parks

 



Contáctenos

Thor Broadcast Ventas


Servicio al Cliente / Soporte





Formulario de contacto

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
*necesario