Thor Fiber uncompressed 3G-CWDM part number F-8SDI-3G-TxRx-RM come in a kit (Tx & Rx) and are standard configuration Fiber Optic Transmitter and Receivers for Serial Digital signals up to 3G-SDI running at 3.0 Gbps. This system can be ordered with any standard CWDM optics package, and internal passives are available by request. This is a 8 Channel system based on a standard 40km platform. No configuration or management is needed, as the system automatically adjusts to any input signal type regardless of bit rate or protocol. Easy to read LED indicators for Input Signal Detect and optical link are present for all channels. Units come standard with ST/PC fiber connectors and a 1RU 19" rackmount form factor to keep your rack clean. Simplified easy to use plug and play units mean that anyone can deploy these in no time. Commercial grade intricate parts means these will work for years without hassle, backed by Thor Fiber's 5 year warranty and free tech support means a stress free guarantee.
Thor part number F-xSDI-Tx/Rx designates a fiber optic transmitter or receiver used to transport serialized digital signals up to 3.0 Gbps. Any channel configuration up to 16 channels per fiber can be designated by value "x". Units can be configured to transport any number of SDI channels in either direction up to a total of 16 per fiber. For even higher densities, DWDM systems are available by request. Thor uses high quality DFB lasers for maximum reliability and distance, with off the shelf models functioning up to 50km when used with single mode fiber. F-SDI systems will transport any digital signal from 1 Mbps to 3.0 Gbps independent of protocol or standard. These systems can be used for anything from 3G-SDI (SMPTE 424M) to multi rate DVB-ASI down to single program at low bit rates. F-SDI units incorporate industry standard internal CWDM modules for compatibility with similar systems from other manufacturers, such as Python™ systems. This standardization allows Thor F-SDI equipment to be used in conjunction with other commercial off the shelf transmitters or receivers from other vendors, including Python™ series equipment. All outputs are automatically re clocked to eliminate problems with jitter and to allow for long cable runs out of the receiver. Applications range from live broadcast and Electronic News Gathering to government and scientific research applications. Contact a Thor Sales Representative today for more information on system design and equipment compatibility.
• Compatible with any Serial Digital Signal up to 3.0 Gbps
• Available with internal optics for use with a single optical fiber
• Standardized channels for both CWDM bands for compatibility with Python™ systems
• Passes SDI embedded audio and all ancillary data
• Input equalization and reclocking for SDI video on buffered outputs
• Available in any custom configuration for Bi-Directional Transport up to 16 total channels
• Real-time status LED indicators for troubleshooting and monitoring
• DWDM systems available by request for higher density systems
F-8SDI-3G-TX/RX-RM 8x SD, HD ,3G SDI over single fiber Transmitter and Receiver kit supporting 20Km
F-8SDI-3G-TX/RX-RM-40 8x SD, HD ,3G SDI over single fiber Transmitter and Receiver kit supporting 40Km
F-8SDI-3G-TX/RX-RM-80 8x SD, HD ,3G SDI over single fiber Transmitter and Receiverkit supporting 80Km
F-8SDI-3G-TX/RX-RM-120 8x SD, HD ,3G SDI over single fiber Transmitter and Receiver kit supporting 120Km
Other available configurations:
7x 3G SDI in one direction and 1x 3G SDI in the reverse direction - F-SDI-3G-7TX1RX-RM + F-SDI-3G-1TX7RX-RM
6x 3G SDI in one direction and 2x 3G SDI in the reverse direction - F-SDI-3G-6TX2RX-RM + F-SDI-3G-2TX6RX-RM
5x 3G SDI in one direction and 3x 3G SDI in the reverse direction - F-SDI-3G-5TX3RX-RM + F-SDI-3G-3TX5RX-RM
4x 3G SDI in one direction - 4x 3G SDI in reverse direction - F-4SDI-B-3G-Tx/Rx-RM
| *All Specifications Subject to Change Without Notice | |||
| Optical Characteristics |
|
||
|
1310 nm CWDM Band *Other Wavelengths Available By Request |
||
|
Single Mode | ||
|
Up to 4.25 Gbps (Model Specific) | ||
|
DFB Laser Module - CWDM | ||
|
25 dB - Standard 35 dB - Long Range |
||
|
ST/PC - Standard | ||
Electrical Characteristics |
|||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
100 - 240 VAC Auto Switching PSU 10 - 30 Watt Depending On Configuration |
||
https://thorbroadcast.com/product/4-hdmi-component-hd-to-coax-and-iptv-hd-8230.html
https://thorbroadcast.com/product/1-4-sdi-to-qam-modulators-and-iptv-streaming-encoders.html
Yes our devices is transparent and can send any SDI signal over fiber up to 3GSDI
Within this standard, there are three formats known as Level A, Level B
Dual Link (B-DL) and Level B Dual Stream (B-DS). The Level A format is
the direct mapping of uncompressed 1080p (up to 60 fps) video into a
the serial digital interface at the nominal 3 Gbit/s. The Level B-DL
the format is the mapping of dual-link HD-SDI/SMPTE 372M (i.e.: 1080p up
to 60 fps) in a single serial digital interface at the nominal 3
Gbit/s. The Level B-DS format is the dual-stream carriage of two
independent HD-SDI/SMPTE 292M signals (720p up to 60 fps or
1080i/1080p up to 30 fps) in a single serial digital interface at the
nominal 3 Gbit/s
Your best bet is to go with the first unit you mentioned; those are very popular, very reliable and a very good price.
The F-8MSDI-TX/RX can support HD-SDI up to 1080i/60, but we can not do
3GDI on it.
We can add 2 Bi-directional Audio card but it will take embedded audio
for the first 2 SDI inputs
https://thorbroadcast.com/product/8-sdi-hdsdi-over-1-fiber-optical-transmission-multiplexer.html
The F-8MSDI-ET-TX/RX is a 8 HDSDI + 10/100 Ethernet
We can add 2 Bi-directional Audio card but it will take embedded audio
for the first 2 SDI inputs
https://thorbroadcast.com/product/8-sd-hd-sdi-ethernet-over-single-fiber-transmission-kit.html
If you require 3G-SDI then we need to use CWDM mux.
F-8SDI-3G-TX/RX-RM
https://thorbroadcast.com/product/8-ch-sd-hd-3g-sdi-over-single-fiber-cwdm-uncompressed-rack-mountable.html
Or The F-SUPERMUX-8 , this unit can mux any 8 signals
We can not add Bidirectional Audio and Gbe both but the total can not
exide 8 , so 2 x for Bidirectional Audio, 1 for Gig ET and 5 for 3G
SDI
https://thorbroadcast.com/product/1-8-channel-flexible-hd-sdi-analog-video-audio-rs-data-etherent-8230.html
If the price matters, I would recommend going with 8 3G SDI
F-8SDI-3G-TX/RX-RM, and external GIG ET and Audio on the separate
devices and separate fibers.
he F-6 SDI-3G-TX supports SDI up to 3G SDI 1080p/59.94/60hz,
it uses 8 separate independent circuits and lasers to
convert electrical SDI signals into optical signals and back to
electrical signals on the receiving side. The 8 optical signals are
passively muxed and demuxed using CWDM. The circuits are completely
independent and fully transparent, so they work as a gateway.
If you need a synchronized signal, this device will not be able to
sync all the signals as they are independent of each other. The only
way to achieve synchronization is by using an external
synchronization.
SDI fiber extender for SD HD 3G and 4K 12G SDI with return RS485 Data
The F-12G-SDI-D-TX/RX is a high-performance 1-channel 12G/6G/3G/HD/SD-SDI optical transceiver, boasting zero loss and delivering high-quality 4K (3840x2160@60) video transmission over optical fiber. Additionally, it facilitates the return of RD485 data, enabling remote control of cameras or other devices from the video receiving location.
1 SD/HD 3G-SDI Over Single Fiber CWDM Uncompressed Rack-Mountable
1 Channel HD-SDI High Definition serial data over fiber. These units can also be customized with different lasers for transport distances of up to 150km. We can also incorporate CWDM or DWDM optics for high density systems.
ES
